Home About Software Documentation Support Outreach Ecosystem Dev Awards Team & Sponsors

Developer's Guide 5.10

Programming Model

One of the most important aspects of Grid Computing is its potential ability to execute distributed communicating jobs. The Distributed Resource Management Application API (DRMAA) specification constitutes a homogeneous interface to different Distributed Resource Management Systems (DRMS) to handle job submission, monitoring and control, and retrieval of finished job status.

In this way, DRMAA could aid scientists and engineers to express their computational problems by providing a portable direct interface to DRMS. There are several projects underway to implement the DRMAA specification on different DRMS, like Sun Grid Engine (SGE), Condor or Torque.

GridWay provides a full-featured native implementation of the DRMAA standard to interface DRMS through the Globus Toolkit. The GridWay DRMAA library can successfully compile and execute the DRMAA test suite (version 1.4.0). Please check the GridWay DRMAA Reference Guide for a complete description of the DRMAA routines.

Although DRMAA could interface with DRMS at different levels, for example at the intranet level with SGE or Condor, with GridWay we will only consider its application at Grid level. In this way, the DRMS (GridWay in our case) will interact with the local job managers (Condor, PBS, SGE…) through the Grid middleware (Globus). This development and execution scheme with DRMAA, GridWay and Globus is depicted in the next figure.

Figure 2. Grid Development Model with DRMAA

Grid Development Model with DRMAA

Application Profiles

DRMAA allows scientists and engineers to express their computational problems in a Grid environment. The capture of the job exit code allows users to define complex jobs, where each depends on the output and exit code from the previous job. They may even involve branching, looping and spawning of subtasks, allowing the exploitation of the parallelism on the workflow of certain type of applications. Let's review some typical scientific application profiles that can benefit from DRMAA.

Embarrassingly distributed

Applications that can be obviously divided into a number of independent tasks. The application is asynchronous when it requires distinct instruction streams and so different execution times. A sample of this schema with its DRMAA implementation is showed in the following figure.

Figure 3. Embarrassingly Distributed Applications schema

Embarrassingly Distributed Applications schema

  rc = drmaa_init (contact, err);
  // Execute initial job and wait for it
  rc = drmaa_run_job(job_id, jt, err);
  rc = drmaa_wait(job_id, &stat, timeout, rusage, err);
  // Execute n jobs simultaneously and wait
  rc = drmaa_run_bulk_jobs(job_ids,jt,1, JOB_NUM,1,err);
  rc = drmaa_synchronize(job_ids, timeout, 1, err);
  // Execute final job and wait for it
  rc = drmaa_run_job(job_id, jt, err);
  rc = drmaa_wait(job_id,&stat, timeout, rusage, err);
  rc = drmaa_exit(err_diag);

Master-worker

A Master task assigns a description (input less) of the task to be performed by each Worker. Once all the Workers are completed, the Master task performs some computations in order to evaluate a stop criterion or to assign new tasks to more workers. Again, it could be synchronous or asynchronous. The following figure shows a example of Master-worker optimization loop and a DRMAA implementation sample.

Figure 4. Master-Worker Applications schema

Master-Worker Applications schema

  rc = drmaa_init(contact, err_diag);
  // Execute initial job and wait for it
  rc = drmaa_run_job(job_id, jt, err_diag);
  rc = drmaa_wait(job_id, &stat, timeout, rusage, err_diag);
  while (exitstatus != 0)
  {
   // Execute n Workers concurrently and wait
   rc = drmaa_run_bulk_jobs(job_ids, jt, 1, JOB_NUM, 1, err_diag);
   rc = drmaa_synchronize(job_ids, timeout, 1, err_diag);
   // Execute the Master, wait and get exit code
   rc = drmaa_run_job(job_id, jt, err_diag);
   rc = drmaa_wait(job_id, &stat, timeout, rusage, err_diag);
   rc = drmaa_wexitstatus(&exitstatus, stat, err_diag);
  }
  rc = drmaa_exit(err_diag);

A simple computational problem

This is a well known exercise. For our purposes, we will calculate the integral of the following function f(x) = 4/(1+x2). So, π will be the integral of f(x) in the interval [0,1].

In order to calculate the whole integral, it's interesting to divide the function in several tasks and compute its area. The following program computes the area of a set of intervals, assigned to a given task:

      #include <stdio.h>
      #include <string.h>
 
      int main (int argc, char** args)
      {
 
      int task_id;
      int total_tasks;
      long long int n;
      long long int i;
 
      double l_sum, x, h;
 
      task_id = atoi(args[1]);
      total_tasks = atoi(args[2]);
      n = atoll(args[3]);
 
      fprintf(stderr, "task_id=%d total_tasks=%d n=%lld\n", task_id,
      total_tasks, n);
 
      h = 1.0/n;
 
      l_sum = 0.0;
 
      for (i = task_id; i < n; i += total_tasks)
      {
          x = (i + 0.5)*h;
          l_sum += 4.0/(1.0 + x*x);
      }
 
      l_sum *= h;
 
      printf("%0.12g\n", l_sum);
 
      return 0;
      }

We will use this program (pi) to develop our DRMAA distributed version.

The DRMAA code

Setting up the job template

Let us start with the definition of each tasks. As you can see, the previous program needs the number of intervals, total tasks, and the task number. These variables are available to compile job templates through the DRMAA_GW_TASK_ID and DRMAA_GW_TOTAL_TASKS predefined strings.

Also, each task must generate a different standard output file, with its partial result. We can use the standard DRMAA_PLACEHOLDER_INCR predefined string to set up different filenames for each task, so they will not overwrite each others output.

        void setup_job_template( drmaa_job_template_t **jt)
        {
        char        error[DRMAA_ERROR_STRING_BUFFER];
        int         rc;
        char        cwd[DRMAA_ATTR_BUFFER];
 
        const char  *args[4] = {DRMAA_GW_TASK_ID,
                                DRMAA_GW_TOTAL_TASKS,
                                "10000000",
                                NULL};
 
        rc = drmaa_allocate_job_template(jt, error, DRMAA_ERROR_STRING_BUFFER);
 
        getcwd(cwd, DRMAA_ATTR_BUFFER)
 
        rc = drmaa_set_attribute(*jt,
                                 DRMAA_WD,
                                 cwd,
                                 error,
                                 DRMAA_ERROR_STRING_BUFFER);
 
        rc = drmaa_set_attribute(*jt,
                                 DRMAA_JOB_NAME,
                                 "pi.drmaa",
                                 error,
                                 DRMAA_ERROR_STRING_BUFFER);
 
        rc = drmaa_set_attribute(*jt,
                                 DRMAA_REMOTE_COMMAND,
                                 "pi",
                                 error,
                                 DRMAA_ERROR_STRING_BUFFER);
 
        rc = drmaa_set_vector_attribute(*jt,
                                        DRMAA_V_ARGV,
                                        args,
                                        error,
                                        DRMAA_ERROR_STRING_BUFFER);
 
        rc = drmaa_set_attribute(*jt,
                                 DRMAA_OUTPUT_PATH,
                                 "stdout."DRMAA_PLACEHOLDER_INCR,
                                 error,
                                 DRMAA_ERROR_STRING_BUFFER);
        }

The main DRMAA routine

The DRMAA program just submits a given number of tasks, each one will compute its section of the previous integral. Then we will synchronize these tasks, aggregate the partial results to get the total value. Note that this results are passed to the DRMAA program through the tasks standard output.

    int main(int argc, char **argv)
    {
    int  rc;
    int  end, i;
 
    char error[DRMAA_ERROR_STRING_BUFFER];
    char value[DRMAA_ATTR_BUFFER];
    char attr_buffer[DRMAA_ATTR_BUFFER];
 
    const char *job_ids[1] ={DRMAA_JOB_IDS_SESSION_ALL};
 
    drmaa_job_template_t *jt;
    drmaa_job_ids_t      *jobids;
 
    FILE *fp;
    float pi, pi_t;
 
    if ( argc != 2)
    {
      fprintf(stderr,"Usage drmaa_pi <number_of_tasks>\n");
      return -1;
    }
    else
      end = atoi(argv[1]) - 1;
 
    rc = drmaa_init(NULL, error, DRMAA_ERROR_STRING_BUFFER-1);
 
    setup_job_template(&jt);
 
    rc =drmaa_run_bulk_jobs(&jobids,
                            jt,
                            0,
                            end,
                            1,
                            error,
                            DRMAA_ERROR_STRING_BUFFER);
 
    fprintf(stderr,"Waiting for bulk job to finish...\n");
 
    rc = drmaa_synchronize(job_ids,
                           DRMAA_TIMEOUT_WAIT_FOREVER,
                           DISPOSE,
                           error,
                           DRMAA_ERROR_STRING_BUFFER);
 
    fprintf(stderr,"All Jobs finished\n");
 
    pi = 0.0;
 
    for(i=0;i<=end;i++)
    {
      snprintf(attr_buffer,DRMAA_ATTR_BUFFER,"stdout.%s",i);
 
      fp = fopen(attr_buffer,"r");
      fscanf(fp,"%f",&pi_t);
      fprintf(stderr,"Partial computed by task %i = %1.30f\n",i,pi_t);
      fclose(fp);
 
      pi += pi_t;
    }
 
    drmaa_release_job_ids(jobids);
 
    fprintf(stderr,"\nPI=%1.30f\n",pi);
 
    drmaa_exit(NULL, 0);
 
    return 0;
    }

This chapter is a tutorial for getting started programming DRMAA applications with GridWay. Although is not necessary that you already know how GridWay works, prior experience submitting and controlling jobs with GridWay will come in handy. This tutorial shows the use of the most important functions in the DRMAA standard, and gives you some hints to use the GridWay DRMAA library.

The source code for the following examples can be found in the “$GW_LOCATION/examples” directory.

DRMAA Program Structure and Compilation

DRMAA C Binding

You have to include the following line in your C sources to use the GridWay DRMAA C bindings library:

#include "drmaa.h"

Also add the following compiler options to link your program with the DRMAA library:

  -L $GW_LOCATION/lib
  -I $GW_LOCATION/include
  -ldrmaa

DRMAA JAVA Binding

You have to import the GridWay DRMAA JAVA package:

import org.ggf.drmaa.*;

Add the following option to the javac:

-classpath $(CLASSPATH):$GW_LOCATION/lib/drmaa.jar

Also do not forget to update your shared library path:

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$GW_LOCATION/lib

DRMAA Programming Howto

DRMAA Sessions

Let us start with the initialization steps of every DRMAA program. Before any call to a DRMAA function you must start a DRMAA session. The session is used to manage the jobs submitted in your Grid application. Before ending the program you should disengage from the previously started session, to free the internal session structures.

Also, as you will see every DRMAA function returns an error code that allows you to check whether the call was successful or not (DRMAA_ERRNO_SUCCESS, if everything goes well). Through out this tutorial, for the shake of clarity, we will get rid of error checking code in most cases. But remember that you should check return codes.

The following example shows you how to manage a DRMAA session. It also shows some information about the DRMAA implementation and the DRMS you are using.

   char         error[DRMAA_ERROR_STRING_BUFFER];
   int          result;
   char         contact[DRMAA_ATTR_BUFFER];
   unsigned int major;
   unsigned int minor;
   char         drm[DRMAA_ATTR_BUFFER];
   char         impl[DRMAA_ATTR_BUFFER];
 
   result = drmaa_init (NULL,
                        error,
                        DRMAA_ERROR_STRING_BUFFER-1);        (See 1)
 
   if ( result != DRMAA_ERRNO_SUCCESS)
   {
       fprintf(stderr,"drmaa_init() failed: %s\n", error);
       return -1;
   }
   else
       printf("drmaa_init() success \n");
 
   drmaa_get_contact(contact,
                     DRMAA_ATTR_BUFFER-1,
                     error,
                     DRMAA_ERROR_STRING_BUFFER-1);            (See 2)
 
   drmaa_version(&major,
                 &minor,
                 error,
                 DRMAA_ERROR_STRING_BUFFER);
 
   drmaa_get_DRM_system(drm,
                        DRMAA_ATTR_BUFFER-1,
                        error,
                        DRMAA_ERROR_STRING_BUFFER-1);
 
   drmaa_get_DRMAA_implementation(impl,
                                  DRMAA_ATTR_BUFFER-1,
                                  error,
                                  DRMAA_ERROR_STRING_BUFFER-1);
 
   printf("Using %s, details:\n",impl);
   printf("\t DRMAA version %i.%i\n",major,minor);
   printf("\t DRMS %s (contact: %s)\n",drm,contact);
 
   result = drmaa_exit (error, DRMAA_ERROR_STRING_BUFFER-1);  (See 3)
 
   if ( result != DRMAA_ERRNO_SUCCESS)
   {
       fprintf(stderr,"drmaa_exit() failed: %s\n", error);
       return -1;
   }
 
   printf("drmaa_exit() success \n");
  1. drmaa_init() is the first DRMAA function in a DRMAA program, and must be called only once per DRMAA program. Almost every DRMAA function uses to special arguments for error reporting pourposes: a string buffer (error), and its length (DRMAA_ERROR_STRING_BUFFER-1). As you can see DRMAA has some predefined buffer sizes for char * variables that you can use, although they are not mandatory.The first parameter of the drmaa_init() function is an implementation dependent string which may be used to specify which DRM system to use. In the GridWay library it can be used to select which GW daemon you want to connect to, NULL means the default option, localhost.If you try to call a DRMAA function outside a session, it will return the error code DRMAA_ERRNO_NO_ACTIVE_SESSION.
  2. This program also shows some information about the DRMAA implementation you are using, by calling the functions drmaa_get_contact(), drmaa_version(), drmaa_get_DRM_system() and drmaa_get_DRMAA_implementation(). You should see something like this:
    Using DRMAA for GridWay 5.8, details:
    DRMAA version 1.0
    DRMS GridWay (contact: localhost)
  3. At the end of the program you should call drmaa_exit() to clean up the library internal structures. Beyond this point you should not be calling any DRMAA function (there are some exceptions like the information functions above, like drmaa_get_contact(),…)

This example shows the same program using the DRMAA JAVA bindings.

   import org.ggf.gridway.drmaa.*;
 
   import java.util.*;
 
   public class Howto1
   {
    public static void main (String[] args)
    {
      SessionFactory  factory = SessionFactory.getFactory();
      Session         session = factory.getSession();
 
      try
      {
        session.init(null);
 
        System.out.println("Session Init success");
 
        System.out.println ("Using " + session.getDRMAAImplementation()
                            + ", details:");
 
        System.out.println ("\t DRMAA version " + session.getVersion());
 
        System.out.println ("\t DRMS " + session.getDRMSInfo() +
                            "(contact: " + session.getContact() + ")");
 
        session.exit();
 
        System.out.println("Session Exit success");
 
      }
      catch (DrmaaException e)
      {
        e.printStackTrace();
      }
    }
   }

Job Template Compilation

So we already have an active session, how do we use it to submit jobs. The first thing to do is to provide a description of your job. A job is described by its job template (a drmaa_job_template_t variable), which in turns is a structure to store information about your job (things like the executable, its arguments or the output files).

The DRMAA standard provides several pre-defined strings to refer to common job template attributes (those staring with DRMAA_ like DRMAA_REMOTE_COMMAND). The GridWay library also defines some macros to refer to GridWay specific attributes (those staring with DRMAA_GW_ like DRMAA_GW_INPUT_FILES).

There are two kind of attributes: scalar and vector. Scalar attributes are simple strings (char *) and corresponds to template attributes in the form:

attribute = value

You can use the drmaa_set_attribute() and drmaa_get_attr_value() to manage these scalar attributes. On the other hand, vector attributes corresponds to job template variables with one or more values i.e:

attribute = value1 value2 ... valueN

A vector attribute is NULL terminated array of strings (char **) . You can use the drmaa_set_vector_attribute() and drmaa_get_next_attr_value() to deal with vector attributes.

We will use a common job template for the rest of the tutorial, so we will make a function to set up this job template. Remember to check the return codes of the DRMAA functions.

  void setup_job_template(drmaa_job_template_t **jt)
   {
    char        error[DRMAA_ERROR_STRING_BUFFER];
    int         rc;
    char        cwd[DRMAA_ATTR_BUFFER];
 
    const char  *args[3] = {"-l", "-a", NULL};              (See 1)
 
    rc = drmaa_allocate_job_template(jt, error, DRMAA_ERROR_STRING_BUFFER-1);
                                                            (See 2)
    if ( rc != DRMAA_ERRNO_SUCCESS)
    {							  (See 3)
        fprintf(stderr,"drmaa_allocate_job_template() failed: %s\n", error);
        exit(-1);
    }
 
    if ( getcwd(cwd, DRMAA_ATTR_BUFFER) == NULL )
    {
        perror("Error getting current working directory");
        exit(-1);
    }
 
    rc = drmaa_set_attribute(*jt,                           (See 4)
                             DRMAA_WD,
                             cwd,
                             error,
                             DRMAA_ERROR_STRING_BUFFER-1);
 
    if ( rc != DRMAA_ERRNO_SUCCESS )
    {
        fprintf(stderr,"Error setting job template attribute: %s\n",error);
        exit(-1);
    }
 
    rc = drmaa_set_attribute(*jt,
                             DRMAA_JOB_NAME,
                             "ht2",
                             error,
                             DRMAA_ERROR_STRING_BUFFER-1);
 
    rc = drmaa_set_attribute(*jt,                           (See 5)
                             DRMAA_REMOTE_COMMAND,
                             "/bin/ls",
                             error,
                             DRMAA_ERROR_STRING_BUFFER-1);
 
    rc = drmaa_set_vector_attribute(*jt,                    (See 6)
                                    DRMAA_V_ARGV,
                                    args,
                                    error,
                                    DRMAA_ERROR_STRING_BUFFER-1);
 
    if ( rc != DRMAA_ERRNO_SUCCESS )
    {
        fprintf(stderr,"Error setting remote command arguments: %s\n",error);
        exit(-1);
    }
 
    rc = drmaa_set_attribute(*jt,                          (See 7)
                             DRMAA_OUTPUT_PATH,
                             "stdout."DRMAA_GW_JOB_ID,
                             error,
                             DRMAA_ERROR_STRING_BUFFER-1);
 
    rc = drmaa_set_attribute(*jt,
                             DRMAA_ERROR_PATH,
                             "stderr."DRMAA_GW_JOB_ID,
                             error,
                             DRMAA_ERROR_STRING_BUFFER-1);
  1. As stated before, every DRMAA function returns an error code that should be checked. Check the DRMAA Reference Guide to find out the error codes returned by each function.
  2. In this code we set up a job template for a simple “ls” command. The arguments are a vector attribute, in this case we are using two arguments “-l” and “-a”. Note that we use an array with 3 elements, the last one must be always NULL.
  3. Before using a job template you must allocate it. This function allocates memory for the library internal structures of your job template. Do not forget to free the job template with drmaa_delete_job_template() function.
  4. The GridWay DRMAA implementation will generate a job template file in the job working directory (DRMAA_WD). This attribute value should be defined, it defaults to the program current working directory (DRMAA_PLACEHOLDER_WD) . Please note that all files are named relative to the wotking directory. DRMAA_WD is a local path name, this directory will be “recreated” (by the use of the DRMAA_GW_INPUT_FILES variable) in the remote host, and it will be the working directory of the job on the execution host.
  5. This is the executable we are going to submit to the Grid, a simple “ls”.
  6. Here we set the arguments, note we are using the vector attribute function.
  7. The standard output of our “ls” command will be stored (under the DRMAA_WD directory) with name “stdout.”DRMAA_GW_JOB_ID. In this case we are using an specific GridWay define DRMAA_GW_JOB_ID, which corresponds to ${JOB_ID}. So, if our job is assigned with id 34 by GridWay, we will have its standard output in “stdout.34”. Use always this naming pattern not to over-write previously generated files.

If everything went well, the following job template will be generated:

   #This file was automatically generated by the GridWay DRMAA library
   EXECUTABLE=/bin/ls
   ARGUMENTS= -l -a
   STDOUT_FILE=stdout.${JOB_ID}
   STDERR_FILE=stderr.${JOB_ID}
   RESCHEDULE_ON_FAILURE=no
   NUMBER_OF_RETRIES=3

This fragment of code shows you how to construct the same template using the DRMAA JAVA bindings.

      jt = session.createJobTemplate();
 
      jt.setWorkingDirectory(java.lang.System.getProperty("user.dir"));
 
      jt.setJobName("ht2");
 
      jt.setRemoteCommand("/bin/ls");
 
      jt.setArgs(new String[] {"-l","-a"});
 
      jt.setOutputPath("stdout." + SessionImpl.DRMAA_GW_JOB_ID);
 
      jt.setErrorPath ("stderr." + SessionImpl.DRMAA_GW_JOB_ID);

Single Job Submission

We can now submit our “ls” to the Grid. The next example shows you how to submit your job, and how to synchronize its execution. The resource usage made by your job is also shown.

   int main(int argc, char *argv[])
   {
    char                   error[DRMAA_ERROR_STRING_BUFFER];
    int                    result;
    drmaa_job_template_t * jt;
    char                   job_id[DRMAA_JOBNAME_BUFFER];
    char                   job_id_out[DRMAA_JOBNAME_BUFFER];
    drmaa_attr_values_t *  rusage;
    int                    stat;
    char                   attr_value[DRMAA_ATTR_BUFFER];
 
    result = drmaa_init (NULL, error, DRMAA_ERROR_STRING_BUFFER-1);
 
    if ( result != DRMAA_ERRNO_SUCCESS)
    {
      fprintf(stderr,"drmaa_init() failed: %s\n", error);
      return -1;
    }
 
    setup_job_template(&jt);                              (See 1)
 
    drmaa_run_job(job_id,
                  DRMAA_JOBNAME_BUFFER-1,                 (See 2)
                  jt,
                  error,
                  DRMAA_ERROR_STRING_BUFFER-1);
 
    fprintf(stderr,"Job successfully submitted ID: %s\n",job_id);
 
    result = drmaa_wait(job_id,
                        job_id_out,                           (See 3)
                        DRMAA_JOBNAME_BUFFER-1,
                        &stat,
                        DRMAA_TIMEOUT_WAIT_FOREVER,
                        &rusage,
                        error,
                        DRMAA_ERROR_STRING_BUFFER-1);
 
    if ( result != DRMAA_ERRNO_SUCCESS)
    {
        fprintf(stderr,"drmaa_wait() failed: %s\n", error);
        return -1;
    }
 
    drmaa_wexitstatus(&stat,stat,error,DRMAA_ERROR_STRING_BUFFER-1);
                                                              (See 4)
    fprintf(stderr,"Job finished with exit code %i, usage: %s\n",stat,job_id);
 
    while (drmaa_get_next_attr_value(rusage,
                      attr_value,                             (See 5)
                      DRMAA_ATTR_BUFFER-1)!= DRMAA_ERRNO_NO_MORE_ELEMENTS )
        fprintf(stderr,"\t%s\n",attr_value);
 
    drmaa_release_attr_values (rusage);                       (See 6)
 
    drmaa_delete_job_template(jt,
                              error,
                              DRMAA_ERROR_STRING_BUFFER-1);
 
    drmaa_exit (error, DRMAA_ERROR_STRING_BUFFER-1);
 
    return 0;
   }
  1. Let us setup the job template with the previous function
  2. Now we can submit a single job to the Grid, with this job template. The job id assigned by GridWay to our job is returned in the job_id variable. So let us print it and you can check the progress of your ls job with the gwps command.
  3. This function will block (DRMAA_TIMEOUT_WAIT_FOREVER) until the job has finished or failed. There are two interesting values returned by the drmaa_wait() function: stat (the exit status of your job), and rusage (the resource usage made by the “ls” command, execution and transfer times). If the job is killed the drmaa_wait() will return with DRMAA_ERRNO_NO_RUSAGE.
  4. DRMAA provides some functions to deal with the stat value. In this case we want to get the exit status of our job (you can also check if the job was signaled, the signal it received…)
  5. Lets print the resource usage. As this is of type drmaa_attr_values_t we have to iterate over the list to get all the values. We finish when we find the DRMAA_ERRNO_NO_MORE_ELEMENTS return code.
  6. Do not forget to free the DRMAA variables, like the job template, or the rusage list allocated by the drmaa_wait() function.

This example shows the same program using the DRMAA JAVA bindings.

   try
   {
    session.init(null);
 
    String id = session.runJob(jt);
 
    System.out.println("Job successfully submitted ID: " + id);
 
    JobInfo info = session.wait(id, Session.DRMAA_TIMEOUT_WAIT_FOREVER);
 
    System.out.println("Job usage:");
 
    Map rmap = info.getResourceUsage();
    Iterator r = rmap.keySet().iterator();
 
    while(r.hasNext())
    {
      String name2 = (String) r.next();
      String value = (String) rmap.get(name2);
      System.out.println(" " + name2 + "=" + value);
    }
 
    session.deleteJobTemplate(jt);
 
    session.exit();
    }
    catch (DrmaaException e)
    {
      e.printStackTrace();
    }

Job Status and Control

But you can do more things with a job than just submit it. The DRMAA standard allows you to control your jobs (kill, hold, release, stop,…) even they are not submitted within a DRMAA session. See the following example:

   int main(int argc, char *argv[])
   {
      char                   error[DRMAA_ERROR_STRING_BUFFER];
      int                    rc;
      drmaa_job_template_t * jt;
      char                   job_id[DRMAA_JOBNAME_BUFFER];
      const char             *job_ids[2]={DRMAA_JOB_IDS_SESSION_ALL,NULL};
      int                    status;
 
      drmaa_init (NULL, error, DRMAA_ERROR_STRING_BUFFER-1);
 
      setup_job_template(&jt);
 
      drmaa_set_attribute(jt,                                 (See 1)
                          DRMAA_JS_STATE,
                          DRMAA_SUBMISSION_STATE_HOLD,
                          error,
                          DRMAA_ERROR_STRING_BUFFER-1);
 
      drmaa_run_job(job_id,
                    DRMAA_JOBNAME_BUFFER,
                    jt,
                    error,
                    DRMAA_ERROR_STRING_BUFFER-1);
 
      fprintf(stdout,"Your job has been submitted with id: %s\n", job_id);
 
      sleep(5);
 
      drmaa_job_ps(job_id, &status, error, DRMAA_ERROR_STRING_BUFFER);
                                                              (See 2)
      fprintf(stdout,"Job state is: %s\n",drmaa_gw_strstatus(status));
 
      sleep(1);
 
      fprintf(stdout,"Releasing the Job\n");
 
      rc = drmaa_control(job_id,                              (See 3)
                         DRMAA_CONTROL_RELEASE,
                         error,
                         DRMAA_ERROR_STRING_BUFFER-1);
 
      if ( rc != DRMAA_ERRNO_SUCCESS)
      {
          fprintf(stderr,"drmaa_control() failed: %s\n", error);
          return -1;
      }
 
      drmaa_job_ps(job_id, &status, error, DRMAA_ERROR_STRING_BUFFER);
 
      fprintf(stdout,"Job state is: %s\n",drmaa_gw_strstatus(status));
 
      fprintf(stdout,"Synchronizing with job...\n");
 
      rc = drmaa_synchronize(job_ids,                        (See 4)
                             DRMAA_TIMEOUT_WAIT_FOREVER,
                             0,
                             error,
                             DRMAA_ERROR_STRING_BUFFER-1);
 
      if ( rc != DRMAA_ERRNO_SUCCESS)
      {
          fprintf(stderr,"drmaa_synchronize failed: %s\n", error);
          return -1;
      }
 
      fprintf(stdout,"Killing the Job\n");
 
      drmaa_control(job_id,                                   (See 5)
                    DRMAA_CONTROL_TERMINATE,
                    error,
                    DRMAA_ERROR_STRING_BUFFER-1);
 
      if ( rc != DRMAA_ERRNO_SUCCESS)
      {
          fprintf(stderr,"drmaa_control() failed: %s\n", error);
          return -1;
      }
 
      fprintf(stdout,"Your job has been deleted\n");
 
      drmaa_delete_job_template(jt,
                                error,
                                DRMAA_ERROR_STRING_BUFFER-1);
 
      drmaa_exit (error,DRMAA_ERROR_STRING_BUFFER-1);
 
      return 0;
  }
  1. We are adding a new attribute to our job template the job submission state (DRMAA_JS_STATE). Our job will be held on submission
  2. Let's check that the job is in the HOLD state. Note that we use a GridWay specific function to show the state drmaa_gw_strstatus(). This function is not part of the DRMAA standard.
  3. OK, so we can now release our job, so it will begin its execution (i.e. will enter the QUEUED_ACTIVE state)
  4. Now let us wait for this job, note that we are not using drmaa_wait() in this case. drmaa_synchronize() can be used to wait for a set of jobs. Its first argument is a NULL terminated array of job ids; we are using an special job name: DRMAA_JOB_IDS_SESSION_ALL, to wait for all the jobs in submitted within your DRMAA session (other special job name is DRMAA_JOB_IDS_SESSION_ANY). The third argument (dispose) if equal to 1 will dispose (kill) the job. In this example we will do it by hand.
  5. Kill the job with the TERMINATE control action.

Let see the same program in JAVA

    try
    {
      session.init(null);
 
      setup_job_template();
 
      String id = session.runJob(jt);
 
      System.out.println("Job successfully submitted ID: " + id);
 
      try
      {
        Thread.sleep(5 * 1000);
      }
      catch (InterruptedException e)
      { // Don't care }
 
      printJobStatus(session.getJobProgramStatus(id));
 
      try
      {
        Thread.sleep(1000);
      }
      catch (InterruptedException e)
      { // Don't care }
 
      System.out.println("Releasing the Job");
 
      session.control(id, Session.DRMAA_CONTROL_RELEASE);
 
      printJobStatus(session.getJobProgramStatus(id));
 
      System.out.println("Synchronizing with job...");
 
      session.synchronize(
            Collections.singletonList(Session.DRMAA_JOB_IDS_SESSION_ALL),
            Session.DRMAA_TIMEOUT_WAIT_FOREVER,
            false);
 
      System.out.println("Killing the Job");
 
      session.control(id, Session.DRMAA_CONTROL_TERMINATE);
 
      session.deleteJobTemplate(jt);
 
      session.exit();
    }
    catch (DrmaaException e)
    {
      e.printStackTrace();
    }

Array Jobs (bulk)

Bulk jobs are a direct way to express parametric computations. A bulk job is a set of independent (and very similar) tasks that use the same job template. You can use the DRMAA_PLACEHOLDER_INCR constat to assign different input/output files for each task. The DRMAA_PLACEHOLDER_INCR is a unique identifier of each job (task) in the bulk (array) job. In the GridWay DRMAA library it corresponds to the ${TASK_ID} parameter.

   int main(int argc, char *argv[])
   {
      char                   error[DRMAA_ERROR_STRING_BUFFER];
      int                    rc;
      int                    stat;
 
      drmaa_job_template_t * jt;
      drmaa_attr_values_t  * rusage;
      drmaa_job_ids_t      * jobids;
 
      char                   value[DRMAA_ATTR_BUFFER];
      const char *           job_ids[2] ={DRMAA_JOB_IDS_SESSION_ALL,NULL};
      char                   job_id_out[DRMAA_JOBNAME_BUFFER];
 
      int                rcj;
 
      drmaa_init (NULL, error, DRMAA_ERROR_STRING_BUFFER-1);
 
      setup_job_template(&jt);
 
      drmaa_set_attribute(jt,
                          DRMAA_OUTPUT_PATH,
                          "stdout."DRMAA_PLACEHOLDER_INCR,    (See 1)
                          error,
                          DRMAA_ERROR_STRING_BUFFER-1);
 
      rc = drmaa_run_bulk_jobs(&jobids,
                               jt,
                               0,				    (See 2)
                               4,
                               1,
                               error,
                               DRMAA_ERROR_STRING_BUFFER-1);
 
      if ( rc != DRMAA_ERRNO_SUCCESS)
      {
          fprintf(stderr,"drmaa_run_bulk_job() failed: %s\n", error);
          return -1;
      }
 
      fprintf(stderr,"Bulk job successfully submitted IDs are:\n");
 
      do 							   (See 3)
      {
          rc = drmaa_get_next_job_id(jobids, value, DRMAA_ATTR_BUFFER-1);
 
          if ( rc == DRMAA_ERRNO_SUCCESS )
              fprintf(stderr,"\t%s\n", value);
 
      }while (rc != DRMAA_ERRNO_NO_MORE_ELEMENTS);
 
      fprintf(stderr,"Waiting for bulk job to finish...\n");
 
      drmaa_synchronize(job_ids,                              (See 4)
                        DRMAA_TIMEOUT_WAIT_FOREVER,
                        0,
                        error,
                        DRMAA_ERROR_STRING_BUFFER-1);
 
      fprintf(stderr,"All Jobs finished\n");
 
      do
      {
          rcj = drmaa_get_next_job_id(jobids, value, DRMAA_ATTR_BUFFER-1);
 
          if ( rcj == DRMAA_ERRNO_SUCCESS )
          {
            drmaa_wait(value,                                 (See 5)
                       job_id_out,
                       DRMAA_JOBNAME_BUFFER-1,
                       &stat,
                       DRMAA_TIMEOUT_WAIT_FOREVER,
                       &rusage,
                       error,
                       DRMAA_ERROR_STRING_BUFFER-1);
 
            drmaa_wexitstatus(&stat,stat,error,DRMAA_ERROR_STRING_BUFFER-1);
 
            fprintf(stderr,"Rusage for task %s (exit code %i)\n", value, stat);
 
            do
            {
              rc = drmaa_get_next_attr_value(rusage, value, DRMAA_ATTR_BUFFER-1);
 
              if ( rc == DRMAA_ERRNO_SUCCESS )
                fprintf(stderr,"\t%s\n", value);
 
            }while (rc != DRMAA_ERRNO_NO_MORE_ELEMENTS);
 
            drmaa_release_attr_values(rusage);
         }
      }while (rcj != DRMAA_ERRNO_NO_MORE_ELEMENTS);
 
      drmaa_release_job_ids(jobids);
 
      drmaa_delete_job_template(jt,
                                error,
                                DRMAA_ERROR_STRING_BUFFER-1);
 
      drmaa_exit (error,DRMAA_ERROR_STRING_BUFFER-1);
 
      return 0;
   }
  1. The output file of each task in the bulk job will be “stdout.”DRMAA_PLACEHOLDER_INCR. So the tasks will not over-write each others outputs.
  2. We submit a bulk job with 5 tasks (0,1,2,3,4), note that we will get five different output files (stdout.0,stdout.1,…). The job ids assigned to each task are stored in the first argument of the function, a drmaa_job_ids_t list.
  3. In order to get each job id you must use the drmaa_get_next_job_id() function. We iterate through the list until DRMAA_ERRNO_NO_MORE_ELEMENTS is returned.Do not forget to free the job id list when you no longer need it.
  4. We wait for all the jobs in the array. Each you will be disposed with a call to the drmaa_wait() function.
  5. We now use the drmaa_wait() function to get each task exit status and resource usage. As we have previously synchronize the bulk job this function will not block. drmaa_wait() will also remove each task from the GridWay system.

Finally a bulk job in JAVA.

   try
   {
    session.init(null);
 
    int start = 0;
    int end   = 4;
    int step  = 1;
 
    int i;
 
    String id;
 
    java.util.List          ids = session.runBulkJobs(jt, start, end, step);
    java.util.Iterator      iter = ids.iterator();
 
    System.out.println("Bulk job successfully submitted IDs are: ");
 
    while(iter.hasNext())
    {
      System.out.println("\t" + iter.next());
    }
 
    session.deleteJobTemplate(jt);
 
    session.synchronize(
              Collections.singletonLsectionist(Session.DRMAA_JOB_IDS_SESSION_ALL),
              Session.DRMAA_TIMEOUT_WAIT_FOREVER,
              false);
 
    for (int count = start; count <= end;count += step)
    {
      JobInfo info = session.wait(Session.DRMAA_JOB_IDS_SESSION_ANY,
                                  Session.DRMAA_TIMEOUT_WAIT_FOREVER);
 
      System.out.println("Job usage:");
      Map rmap = info.getResourceUsage();
      Iterator r = rmap.keySet().iterator();
 
      while(r.hasNext())
      {
        String name2 = (String) r.next();
        String value = (String) rmap.get(name2);
        System.out.println(" " + name2 + "=" + value);
      }
    }
 
    session.exit();
   }
   catch (DrmaaException e)
   {
      System.out.println("Error:   " + e.getMessage());
   }

Debugging

  • $GW_LOCATION/var/gwd.log: This is the general log file, where the gwd daemon logs whatever the Resource, Dispatch, Transfer, Execution, Information managers inform it about.
  • $GW_LOCATION/var/sched.log: The scheduler is a separate process that communicates with the daemon using the standard input/output. It writes log information to this file.
  • $GW_LOCATION/var/<job_id>/job.log: Each job has its own log file, with information regarding its context (input/output files, MADs, resource) and it's life cycle. In this folder also reside the job.template, the job.env with the environment variable and the standard output and error of the wrapper script (stdout.wrapper and stderr.wrapper)

./configure --enable-debug
export MADDEBUG=yes
ulimit -c unlimited
$GW_LOCATION/var/core.<process_pid>

  • $GW_LOCATION/var/gwd.log
  • $GW_LOCATION/var/sched.log
  • $GW_LOCATION/var/<job_id>/{job.log,stderr.wrapper}: If relevant. The stderr.wrapper file is specially useful for debugging, it shows step by step the wrapper script being executed.

Troubleshooting

• Lock file exists

GridWay finishes with the following message when you try to start it:

Error! Lock file <path_to_GridWay>/var/.lock exists.

Be sure that no other GWD is running, then remove the lock file and try again.

• Error in MAD initialization GridWay finishes with the following message, when you try to start it:

Error in Execution MAD prews initialization, exiting. Check path,
you have a valid proxy...

Check that you have generated a valid proxy (for example with the grid-proxy-info command). Also, check that the directory “$GW_LOCATION/bin” is in your path, and the executable name of all the MADs is defined in “gwd.conf”.

• Error contacting GWD

Client commands, like gwps, finish with the message:

connect(): Connection refused
Could not connect to gwd

Be sure that GWD is running (ex. pgrep -l gwd). If it is running, check that you can connect to GWD (ex. telnet `cat $GW_LOCATION/var/gwd.port`)

Admin · Log In